News Ticker

CNC

CNC PC Recovery

June 20, 2012 // 0 Comments

If you got to the end of yesterday’s post you know that, after spending an entire day reviving and configuring a 7-year old Compaq PC to use with the BlueChick, [...]

CNC PC Setup

June 19, 2012 // 0 Comments

Getting the BlueChick CNC machine up and running is more than just assembling the deck. It requires wiring up the electronics, installing a host of software programs, [...]

BOB and SMD Setup

June 18, 2012 // 0 Comments

The movement of the router on BlueChick CNC machine is controlled by specialized software running on a PC. However, before the BlueChick and the computer can [...]

Back To The BlueChick

June 14, 2012 // 0 Comments

We posted a series of RainyDayProject articles on the BlueChick CNC machine last August. The RainyDay office quickly came up with a bunch of projects over the Winter [...]

BlueChick Assembly Completed

August 12, 2011 // 0 Comments

Today we will finish up the assembly of the BlueChick v4.2 CNC machine. The only tasks left are: mounting the X-axis motor and installing the two drive chains. The motor [...]

BlueChick Motor Mounts

August 11, 2011 // 0 Comments

For the past three days we have been discussing the assembly of the frame and axesof the BlueChick v4.2 CNC machine. Now that most of the structure has been assembled, [...]

BlueChick Z Axis Assembly

August 10, 2011 // 0 Comments

We have been building the BlueChick V4.2 CNC machine this week. Yesterday, we looked at the assembly of the X/Y-axis. Today, we will go over the assembly of the Z-axis. [...]

BlueChick XY Axis Assembly

August 9, 2011 // 0 Comments

Yesterday was the start of the series on assembling the BlueChick v4.2 CNC machine. We gave some suggestions on the general assembly process and showed how to assemble [...]

BlueChick Deck Assembly

August 8, 2011 // 0 Comments

Last week we gave a quick FirstLook of the BlueChick v4.2 CNC kit. Today we’ll walk through the assembly of the deck portion of the build. There is an excellent [...]

BlueChick Unpacking

August 5, 2011 // 0 Comments

After doing our research on DIY CNC kits, we decided that the BlueChick V4.2 was the one which best fit our needs. The complete kit ncludes: frame, hardware (screws, cross [...]
1 2