News Ticker

BirdCam Pro FirstLook

The Audubon BirdCam has made it easy to get snaps of visitors to the bird feeders in the RainyDayGarden. Wingscapes, the maker of the BirdCam, released an update to that amazing automated camera a few weeks ago. Today, we are going to take a FirstLook at what is new about the BirdCam Pro.

The  BirdCam Pro now has a higher resolution 8 Megapixel sensor and a built-in LED flash. Like the original BirdCam, the Pro will take photos when the infrared motion-detector is triggered. However, the Pro’s triggering capabilities have been extended to include a timer. So now it will be possible to not only capture birds visiting the feeder, but flowers opening, spiders web-spinning, and other such time-lapse events.

The redesigned Pro model has a new rubber seal, similar to the Pelican or Otterbox waterproof cases. On the back of the camera is an additional 1/4-20 threaded standard mounting point. It als has beefed-up loops for a strap instead of holes for bungee cords. Instead of a cover on the back, the battery compartment is now a pop out tray located at the bottom of the case (and takes six C-size). The tray’s new location offers better protection for the batteries against the external elements.

Another difference between the original BirdCam and the Pro model is the controls. Many of the menu options have now been made into physical buttons on the front panel. This approach makes access to the settings quicker and less complicated.

We especially like that the focus can now be precisely set. The process is still trial-and-error, but users are no longer limited to only the few click-settings as with the first BirdCam. Of course, it may not make much of a difference as the depth-of-field is pretty deep with that small aperture. Still, it is good to be able to tweak it if desired.

As can be seen in the  comparison of the original BirdCam (left), the new BirdCam Pro case is shorter, the camera port is bigger, it has two banks of LEDs, and a view finder. Gone is the external camera trigger and the LCD info window. Also, along with mounting straps, the camera now comes with a clamp. It is a shorter version than the pole mount we looked at a little while ago, but it works pretty much the same way.

The BirdCam Pro now has color TFT instead of an LCD info display. The larger screen makes it easier to navigate the various setup and other options. The bonus is that the recorded images may now be reviewed directly on the BirdCam Pro. This is helpful for a quick check when in the field, without the need for a computer.

While some users were able to get WiFi SD cards to work with the original BirdCam, a number had problems as the device was never offically designed with those types of memory cards in mind. The Pro is and should make it even more convenient to offload images from the camera, especially if mounted in harder-to-reach locations.

Here are some of the relevant specs on the new 8 MegaPixel BirdCam Pro camera:

  • Max still resolution – 3264×2448
  • Focus – 6″ to Infinity
  • Flash – 24 LEDs, range is 5′ to 60′
  • AVI video w/audio – 640×480, 30FPS

The higher pixel resolution and more variable focus settings will enable the user to clear and sharper images. It does mean fewers images will fit on a given SD card (900/2GB, 7200/16GB). Fortunately, the price of bigger SD cards have fallen dramatically. A 2GB card will cost less than $5 and 32GB cards can be found $20 !

Like the original BirdCam, the Pro has a laser for aiming the camera. However, we find the optical viewfinder to be easier to use. Plus it lets us check on the framing of the shot to make sure it is not off-center. With the physical controls, we are able to easily see the settings at a glance. These changes all contribute to the increase in usability of the camera so one does not miss those

By now, readers should realize that the BirdCam Pro is not just a camera for photographing birds. The new shooting modes will enable the Pro to serve as a security camera, to document construction projects, and other such applications. Later on this month, we hope to have some results to show off what this new BirdCam can do. Oh yeah, we also got a few Wingscapes automated birdfeeders for the RainyDayGarden. More on that later in the Fall 🙂

1 Trackbacks & Pingbacks

  1. RDG Spring Prep 2017 | RainyDayMagazine

Leave a comment

Your email address will not be published.


*